Programming mode
71 / 203
step info/button instructions
9
Select the cooking mode for the second
program step.
10 Select the required cooking parameters.
11
Press the button once to save the step. You can
then add another step.
12
Press the button to exit the programming
process again.
You can set an audible signal to sound when each individual program step
has been carried out. To do this, press the "Buzzer" button.
You can set the desired air speed in every program step.
You can set the humidification to one of 3 stages in Hot air and
Combination cooking mode for every program step. See also the "Manual
humidification" section.
To Next Page
Loading...
