Operation QUANTRON-A
59
4
AUTO km/h: Automatic operation
1. Switch on the QUANTRON-A control unit.
2. Open the Machine settings > AUTO/MAN mode menu.
3. Highlight the AUTO km/h menu item
4. Press the Enter key.
5. Configure the fertiliser settings:
Application rate (kg/ha)
Working width (m)
6. Refill the hopper with fertiliser.
7. Carry out a calibration to determine the flow factor
or
determine the flow factor using the provided fertiliser chart.
8. Enter the flow factor manually.
9. Press the Start/Stop key.
The spreading starts.
MAN km/h: manual operation
1. Switch on the QUANTRON-A control unit.
2. Open the Machine settings > AUTO/MAN mode menu.
3. Select MAN km/h in the menu.
The Forward speed input window is displayed.
4. Enter the value for the forward speed during spreading.
5. Press the Enter key.
NOTICE
In order to achieve an optimum spreading result, a calibration test should be car-
ried out before spreading.
NOTICE
In order to achieve an optimum spreading result, a calibration test should be car-
ried out before spreading.
To Next Page
Loading...