3
Manual No. 016-0230-004 Rev. F 13
PowerGlide
Mount the AutoBoom Valve
FIGURE 2. AutoBoom Valve Mounted on the Mounting Plate
1. Secure the AutoBoom valve (P/N 063-0131-127) to the mounting bracket (P/N 107-0171-676) using four
5/16”-18 x 7/8” hex bolts (P/N 311-0052-104) and four 5/16” zinc plated lock washers (P/N 313-1000-019).
FIGURE 3. AutoBoom Valve Mounted on the Machine
2. Secure the mounting bracket to the machine’s center rack using the machine’s bolts and four 5/16”-18 zinc
flanged lock nuts (P/N 312-1001-169).
To Next Page
Loading...
