Raven AutoBoom - Connecting the Controller 22; Connecting the Harness to the Boom Func; Tion Controls - Newer Hydraulic; Valves

Index
Manual No. 016-0230-004 Rev. F 83
E
Electrical
Safety 2
H
Hydraulic
Fittings 4
Safety 2
I
Important Safety Information
Electrical 2
Hydraulics 2
Introduction
Updates 5
K
Kit Contents
PowerGlide 7
PowerGlide Plus 25
UltraGlide 51
P
Point of Reference 4
PowerGlide 7
Install
Gauge Wheels 19
Gauge Wheel Mounting Locations 19
Mounting the Gauge Wheels 19
Hydraulic System 11
Hydraulic Schematic 18
Identifying the Machine’s Hydraulic Valve 12
Installing Fittings on the AutoBoom Valve 12
Installing Left and Right Cylinder Hoses 16,
61
Installing Pressure and Tank Hoses - Newer
Hydraulic Valves 14
Installing Pressure and Tank Hoses - Older
Hydraulic Valves 15
Mounting the AutoBoom Valve 13
Wiring 20
Connecting the Controller 22
Connecting the Harness to the Boom Func-
tion Controls - Newer Hydraulic
Valves (No Ring Terminals) 20
Connecting the Harness to the Boom Func-
tion Controls - Older Hydraulic
Valves (Ring Terminals) 21
Connecting the Harness to the Controller
Cable 21
Connecting the Power Leads 22
Wiring Connections 20
Wiring Schematic 23
AutoBoom Controller 23
Kit Contents 7
PowerGlide Plus 25
Install
Gauge Wheels 39
Gauge Wheel Mounting Locations 39
Mounting the Gauge Wheels 39
Hydraulic System 29
Hydraulic Schematic 38
Identifying the Machine’s Hydraulic Valve 30
Installing Fittings on the AutoBoom Valve 32
Installing Left and Right Cylinder Hoses 36
Installing Pressure and Tank Hoses - Newer
Hydraulic Valves 33
Installing Pressure and Tank Hoses - Older
Hydraulic Valves 35
Mounting the AutoBoom Valve 33
Removing the Orifice Fittings 30
Wiring 40
Connect the Harness Cable to the Controller
Cable 44
Connect the Power Leads 45
Connecting the Controller 44
Connecting the Field Computer 44
Connecting the Harness to the Boom Func-
tion Controls - Newer Hydraulic
Valves 40
Installing the AutoBoom Node 40
Wiring Connections 40, 69
Wiring Schematics 46
AutoBoom Controller 46
Envizio Plus 47
SCS 4000/5000 48
Viper Pro & Envizio Pro 49
Kit Contents 25
Preparing for Installation 4
R
Recommendations 4
Replacement Parts
Sensors 81
Valve Blocks 79
Valves
PowerGlide 79
PowerGlide Plus and UltraGlide 80
Wheels 80
T
Tools Needed 4
U
UltraGlide 51
Install
Gauge Wheels - Optional 68
Gauge Wheel Mounting Locations 68
Mounting the Gauge Wheels 68
Hydraulic System 56
Hydraulic Schematic 63
Identifying the Machine’s Hydraulic Valve 57
Installing Fittings on the AutoBoom Valve 58
Installing Left and Right Cylinder Hoses 61
Installing Pressure and Tank Hoses - Newer
Hydraulic Valves 59
Installing Pressure and Tank Hoses - Older