CHAPTER
2
Manual No. 016-0230-004 Rev. F 3
C hapter 2
Introduction
Introduction
Congratulations on your purchase of the Raven AutoBoom system! This system is designed to provide
automated boom height adjustment for agricultural equipment.
This manual applies to the following machines. For future reference, write your serial number in the space
below.
MAKE: Miller
MODEL: Nitro 2000 Series
YEAR:
SERIAL NUMBER: Pre 21.12733
FIGURE 1. Miller Nitro N1 Series
Note: This manual contains the installation instructions for the PowerGlide, PowerGlide Plus, and
UltraGlide systems. Be sure to identify which system you have and follow only the instructions for
that system.
To Next Page
Loading...
