4
Manual No. 016-0230-004 Rev. F 33
PowerGlide Plus
Mount the AutoBoom Valve
FIGURE 8. AutoBoom Valve Mounted on the Mounting Plate
1. Secure the AutoBoom valve (P/N 063-0131-124) to the mounting bracket (P/N 107-0171-676) using four
5/16”-18 x 7/8” hex bolts (P/N 311-0052-104) and four 5/16” zinc plated lock washers (P/N 313-1000-019).
FIGURE 9. AutoBoom Valve Mounted on the Machine
2. Secure the mounting bracket to the machine’s center rack using the machine’s bolts and four 5/16”-18 zinc
flanged lock nuts (P/N 312-1001-169).
Install the Pressure and Tank Hoses - Newer Hydraulic Valves
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine’s system may be
extremely hot and under high pressure.
To Next Page
Loading...
