Chapter 5
56 Miller Nitro 2000 Series AutoBoom™ Installation Manual
Install the UltraGlide Hydraulic System
U-Bolt - 3-1/16” W x 4” L x 3/8” Thread 107-0171-608 4
Bolt - 1/2”-13 x 1-1/2” SS Hex 311-0058-186 4
Nut - 1/2”-13 Zinc Hex 312-1001-043 4
Nut - 3/8”-16 Zinc Flanged Lock 312-1001-164 8
Nut - 7/16”-16 Zinc Flanged Lock 312-1001-165 8
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
TABLE 4. Optional Wheel Kit (P/N 117-0133-004)
Picture Item Description Part Number Qty.
To Next Page
Loading...
