5
Manual No. 016-0230-004 Rev. F 57
UltraGlide
Identify the Machine’s Hydraulic Valve
Before beginning the AutoBoom installation, you must first determine the type of hydraulic valve installed on
the machine. Generally, older hydraulic valve hydraulic ports point to the ground, while newer hydraulic valve
ports point out.
FIGURE 1. Older and Newer Machine Hydraulic Valves
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
NOTICE
The appearance of the AutoBoom hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
To Next Page
Loading...
