4
Manual No. 016-0230-004 Rev. F 29
PowerGlide Plus
Install the PowerGlide Plus Hydraulic System
Nut - 3/8”-16 Zinc Flanged Lock 312-1001-164 8
Nut - 7/16”-16 Zinc Flanged Lock 312-1001-165 8
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
NOTICE
The appearance of the AutoBoom hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
TABLE 3. PowerGlide Plus Wheel Kit (P/N 117-0133-004)
Picture Item Description Part Number Qty.
To Next Page
Loading...
