nVent.com/RAYCHEM
|
59RAYCHEM-OM-EU2032-NGCUIT3EX-EN-2203
• Level - Allows access to System | Maintenance window, which permits clearing of Events and program exit.
- The default password is 1234.
Change the Level 2 password after commissioning.
1234
Enter your user-defined Level 2 password.
Confirms password has been saved.
Save and protect the Level 2 password in a secure location. Contact a nVent representative for lost password
recovery.
(Level 2 Password Required) This window allows for clearing the Events List and to exit the program.
Fig. 3.49 System | Maint window
The System | Maint. window provides the following controls:
• Clear Events List Action Button - Clears all Events and Alarms history
By clearing the event, all the Events and Alarms history information for all Circuits is lost. If the program exit is
chosen, heaters are no longer monitored.
To Next Page
Loading...
Need help?
General
