4.4 Menu Item “Test“ Page 37
You will see the following picture on your display, if, for example, the testing
range values with the pre-set values are selected.
1 5
4
3
2
With this display, the Rayocomp PS 10 informs you about which fundamental
frequency value is being tested at present (1), how many fundamental
frquency values are going to be tested altogether (2), how many fundamental
frequency values have already been tested (3), how many fundamental
frequency values have caused a resonance (4) and whether the currently
displayed fundamental frequency value is a resonance value (5).
With the help of the sensor, you can find out whether there is any resonance
and if this resonance is strong or weak (compare chapter 4.2.1). As a
practical feature while testing, you can set the next value or store the current
value with the sensor (compare chapter 4.1.5).
4.4.1 Testing Range Values
The idea behind this test is to find out all the fundamental frequency values
in disorder at the moment, then to store and harmonise them. With the bio-
resonance devices according to Paul Schmidt, it is possible to carry out a
resonance test in a very wide range of fundamental frequency values. In
practice, this is how it works: beginning with the fundamental frequency
value 0.00, you start testing whether this fundamental frequency value is
required for regulation. If this is the case, it is stored in the Rayocomp PS 10.
Carry on by testing the fundamental frequency value 0.50, then 1.00 and so
on.
After the test, precisely those resonance values necessary for regulating the
organism of the patient have been determined. In a way, the detected
resonance spectrum presents the energetic fingerprint.
The complexity of the determined fundamental frequency values reflects the
complexity of the disorder. Therefore, a diagnosis is normally not given after
the first test. But the so found resonance values are used for harmonisation.
This is carried out by transferring the fundamental frequency values to the
tested person via hand and foot detectors or Velcro detectors.