4.4.5 RAH Module 10: Level test Page 40
4.4.5 RAH Module 10: Level test
Basics for the RAH Module M10
For the Rayocomp PS 10, the module M10 is the most effective module,
which has, in addition to the module M9, numerous test functions. The
module M10 offers test protocols. With these protocols, all necessary RAH-
programme numbers can be provided for the user’s test at the push of a
button. The corresponding RAH programme numbers don’t have to be
entered separately. The test results are then available for harmonisations as
well as for storing them on the RAH ‘Green Card’. Furthermore, the module
10 supports the level test, known from the Rayocomp PS 1000 polar. When a
main RAH-programme is chosen, the sub RAH-programmes can be selected
and tested by the use of the sensor’s button. IF you already use a RAH-
module with your Rayocomp PS 10, an upgrade to higher modules is
possible, e.g. from module 9 to module 10.
The level test
The level test supports the user very efficiently in the analysis of energetic
disfunctions. Using the example of electro smog tests, we concretise it as
follows: If there is a general force of electro smog (RAH-No. 04.00), you can
narrow it on level 2 to find out, whether these problems occur from electric
and magnetic alternating fields (RAH-No. 04.10), from pulse-modulated
radiation (RAH-No. 04.20) or from high-energy radiation (RAH-No. 04.30). If
there is, for example, a problem due to pulse-modulated radiation, you can
switch on the third and last level, the detail level. Here, frequency structures
are available to find out in detail, whether forces due to mobile
communications, UMTS, WLAN or Bluetooth are existent. This level structure
is a central theme through the total RAH ( cause, physiology, pathology,
special programmes like Bach flowers, Schüssler salts, …) and enables
indications for energetic disfunctions and a fast and effective testing of
frequency ranges, necessary to be harmonised.
If Module 10 is activated in Rayocomp
PS 10, please press the
key
until you see under the menu item test
the display shown here on the left. The
display shows rAH. The user is then
informed, that he can test RAH-
programmes.
To Next Page
Loading...
