4.5.6 Activating and deactivating modules Page 53
4.5.6 Activating and Deactivating Modules
Setup Number: 20
At present, a total of ten modules can be activated or deactivated,
respectively, in the Rayocomp PS 10. If, for example, the harmonising
programs of the acupuncture oscillation therapy are not activated on your
device yet, you can use them immediately after activating them with an
enabling code. This sub-item of the menu has the function of activating or
deactivating modules.
After having entered the setup number 20, you can select the number of the
module intended for activation or deactivation. (Please confirm each input
with the OK-key.)
Here is a list of the module numbers:
Module-
No.
Designation
01 Setup precision of 0.05
02 54 integrated harmonising programs
03 14 Acupuncture oscillation therapy
04 22 Programs according to Dr. Ulrich
05 9 special programs
06 11 Test programs
07 72 B.A.T. acute programmes according to Manfred
Denecke
08
Rayonex Analysis and Harmonising programme
(RAH), Module 8
09
Rayonex Analysis and Harmonising programme
(RAH), Module 9
10
Rayonex Analysis and Harmonising programme
(RAH), Module 10
Your final action is to enter the seven-place code for activating or
deactivating and confirm your command with the OK-key.
To Next Page
Loading...
