3. Basics of the Rayocomp PS 10 Page 5
3. Basics of the Rayocomp PS 10
3. 1 Volume of delivery
The delivery volume consists of: 1. The RAYOCOMP PS 10
2. Integrated polariser
3. Integrated power pack
4. Battery charger
5. User Manual
6. Transport case
7. Cardboard packing box
It is absolutely necessary to keep the packing; in case you have to return the
device for maintenance (e.g. for servicing), please send it back in its
transport case and the cardboard box. We cannot take over the guarantee for
insufficient packing.
If the old packing material gets lost, we can replace it on request, liable to
costs.
When sending back the device, please make sure that all additional parts
and accessories are secured inside the case! In case you intend to send
back the PS10, please always include the appurtenant charging set.
3.2 Technical Data
Weight of the Rayocomp PS 10: 1.6 kg
Weight including case and accessories: 9.7 kg
Height: 100 mm
Width: 160 mm
Depth: 260 mm
Power supply for charging: 100 – 240 V alternating current,
17V/8.4 V secondary direct
current
Max. reception capacity for charging: 24 W
Operation time with a fully charged
power pack: 8 hours (at least)
Range of the operation temperature: 15° C - 35° C
The device should not be exposed to great thermal fluctuations, otherwise
you run the risk of condensation build-up inside.
If the instrument has cooled down (i.e. during transportation) to very low
temperatures (below 5° C), you have to make sure it is sufficiently
acclimatised within the working temperature range mentioned above before
switching it on.
To Next Page
Loading...