V rth Audio Equipment: Programming and Basic Operation
Re._erto your Audio equipment owner's manual to hook up your audio equipment. Your remote controls only RCA audio
equipment such as a radio, CD player, tape player, turntable, or amplifier. The remote may need to be programmed for
your equipment. Use the codes below or on the sheet packed with your remote.
Program the remote for audio equipment
A. Point the remote at the audio equipment
and hold AUDIO.
B. Enter the code from the code list.
C. Release AUDIO.
D. Press ON/OFF to turn it on. If nothing
happens, try pressing AUDIO and then
ON/OFF.
E. Repeat A-D with another code if the first
one does not work.
Basic Operation
A,
Point the remote at the audio equipment
and press AUDIO.
B. Press ON/OFF to turn it on.
C.
D.
Use the buttons on the remote that relate
to audio functions. Not all buttons high-
lighted may work with your equipment.
Turn the audio equipment off using the
audio component's power off button.
Audio Codes
RCA/Dimensia
AM/FM ...........................03
CD....................................07
Tape .................................06
Phono ..............................05
Aux ..................................04
_t5
To Next Page
Loading...
