b,p_ II&VA_] IR':'JTI_'13_
With Remote Buttons
1. Power Buttons
OFF
Turns off the _.
Turns off compatible VCRs.
ON/OFF
Turns on a component after a
component button is pressed.
Turns off components except
audio equipment.
2.. TV Buttons
CHAN ^ and v
(Channel up and down)
Scansup and down through
channels in the TV's memory.
Moves up and down menus.
See Menu Basics on page 5.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
DONE
Saves the setup of a feature
and removes the menu from
the screen.
MENU
Shows menus on the screen
and moves from menu to
menu.
MUTE
Switches the TV sound on or
off.
PREV CH (Previous
Channel)
Changes back and forth
between two channels.
TV
Turns on the TV.
Shows the displays on the
screen.
Sets the remote to control the
TV.
See Using the Remote with a
VCR, Cable Box, Laserdisc Player
and Audio equipment on
pages 8-15.
Select a channel and then
select another. Press PREV CH
to switch between the two
channels.
RESET
Returns the picture adjust-
ments to the original settings.
SKIP:30 (Commercial Skip)
Allows you to scan other chan-
nels during commercials.
Each press adds 30 seconds.
TV switches back to original
channel when time runs out.
Press CLEAR to cancel SKIP.
VOL + and -
(Volume up and down)
Raises and lowers sound.
Moves left and fight on a
menu line. See Menu Basics on
page 5.
Changes a feature setting.
3.. Number Buttons (0-9)
Selects any channel number.
Two numbers must be
pressed for each channel.
Press 0 and 6 for channel 6.
For three digit channels, press
and hold 1 until 1- appears
on the screen. Then press the
other two numbers.
6
To Next Page
Loading...
