Setting the TV for Cable or Air
The TV automatically adjusts this feature when the TV places channels in memory (autoprogram). Follow the steps
below to change the setting as needed.
1. Select the Setup menu
Press MENU repeatedly to select the Setup
menu. This menu is white.
Controls Alarm Ad
13
2. Highlight Cable/Air
Press CHANNEL down to highlight
Cable / Air.
Controls Alarm Ad
13
3. Select Cable or Air
Press + or-- to select Cable or Air. Select
Cable if you have cable system. Select Air if
you have a home antenna connected to your
TV.
Controls Alarm
13
4. Press DISPLAY or DONE
Press DISPLAY or DONE to remove the menu
from the screen.
27
To Next Page
Loading...
