• PressandholdREW when the
camcorder's CAM/OFF/VCR switch
is in CAM to visually search the
recorded material in reverse. When
you release REW, the camcorder
stops searching and will record at
that point on the tape.
(_) A/V (Audio/Video) DUB Button
• Use this button to record new audio
and video in place of existing audio
and video on a recorded tape.
Details are on page 48.
DISPLA Y Button
• Press DISPLAY to turn the time
counter's memory-stop feature on
and off.
RESET Button
• Press RESET to set the time counter
back to "'0:00:00".
(_ F.FWD (Fast Forward)
Button
• Press F.FWD when the camcorder's
CAM/OFF/VCR switch is in VCR to
fast forward the tape.
• Press F.FWD during playback
(camcorder's CAM/OFF/VCR switch
in VCR) to visually search the tape
forward at a high speed. Press PLAY
to return to normal playback.
• Press and hold F.FWD when the
camcorder's CAM/OFF/VCR switch
is in CAM to visually search the
recorded material forward. When
you release the F.FWD button, the
camcorder will stop searching, and
prepare to record at that point on
the tape.
(_ STOP Button
• Press STOP when the camcorder's
CAM/OFF/VCR switch is in VCR to
stop playback, rewinding, or fast
forwarding.
• STOP has no effect when the
camcorder's CAM/OFF/VCR switch
is in CAM. To stop recording, press
PA USE/RECORD.
(_ PA USE/RECORD Button
(same
as thumb trigger on camcorder)
• Press and release PA USE/RECORD
when the CAM/OFF/VCR switch is
in CAM to start and stop recording.
• Press PA USE/RECORD during
playback (camcorder' s CAM/OFF/
VCR switch in VCR)toproduce a
stop-action picture. Press PA USE/
RECORD again to return to normal
playback.
_ TITLE ON/OFF Button
• Press TITLE ON/OFF to display and
remove the titler graphics from the
viewfinder. Details are on pages 46-47.
ZOOM (W and T) Buttons
• Press and hold W ZOOM to move the
lens in the wide-angle direction.
• Press and hold T ZOOM to move the
lens in the telephoto direction.
13
To Next Page
Loading...
