Time-Remaining Display
The time-remaining display shows the amount of recording or playback time
left on the tape in the camcorder.
The display will display .... for
approximately ten seconds when you first
start playing or recording a tape while the
camcorder calculates the time remaining.
After the time is calculated, the time-
remaining indicator appears in the
viewfinder or LCD monitor.
• TAPE END flashes when there is
approximately three minutes of
recording time left on the cassette.
TAPE END appears briefly during
recording when the end of the cassette
is reached.
_---ql
i
L
When the cassette is full, _ 1
appears.
The 1 changes in size to indicate
how much recording or playback time is
left on the cassette.
Note: Once time remaining has been
calculated, it will automatically be updated
and readily available as long as the same tape
remains in the camcorder.
Program AE (Auto Exposure)
Auto Exposure when you want the camcorder to automatically select the shutter speed
and adjust the iris accordingly.
AE:60
Auto Exposure Display in
Viewfinder or LCD Monitor
The AE indicator for the shutter speed
selected (1/60, 1/100, 1/120, 1/180,
1/'250, 1/350, 1/500, 1/750, 1/1000,
1/1500, 1/2000, or 1/4000 second)
appears in the viewfinder or LCD
monitor.
24
To Next Page
Loading...
