Using the Optional Thomson Car Cord Adapters
The optional DCC06 car cord adapter allows you to power your camcorder from the cigarette
lighter socket of a car, truck, or RV. They convert 24- and 12-volts to a 6-volt output.
Notes: Consult instructions enclosed with the DCC06 for details.
The vehicle's engine does not have to be turned on when using the car cords.
When using the car cords, the battery level indicator has no meaning.
Optional accessories are shown on pages 59-65.
Cautions: The DCC06 is designed to be used only with vehicles having negative ground
electrieal systems.
Do not use any other car cords_ They will damage your camcorder+
Using the DCC06 Car Cord Adapter to Power the Camcorder
Adapter/Charger's
DC Cable
Car Cord Adapter
DC IN 6V Jack
on back of Camcorder
1. Make sure the camcorder's
CAM/OFF/VCR switch is in OFF.
2. Connect the DC cable's small plug
into the DC OUTPUT jack on the car
cord adapter.
3. Attach the other end of the cable to the
DC IN 6V jack on the camcorder.
4. Insert plug of car cord adapter into
vehicle cigarette lighter's socket.
5. Press and hold the small button on the
CAM/OFF/VCR switch while sliding it
in CAM.
19
To Next Page
Loading...
