RCA PROV742 - Date Search

Date Search
You can search for the beginning and end of recordings you make on a certain day.
CAM/OFF/VCR switch
DA TE/DISP. button
F.FWD button
PLAY button (also TITLER button)
STOP button
(also T1TLER button)
REW Button--
STOP Button t
DISPLAY /
REW/REVIEW button
(also TITLER button)
Button
- F.FWD
Button
\PLA Y
Button
To Date Search
The clock cell battery must be installed
and the date and time set. The cassette
must remain in the camcorder for this
feature to operate.
1. Attach a power supply and place the
CAM/OFF/VCR switch in VCR.
2. Repeatedly press DISPLAY to display
SEARCH in the viewfinder or LCD
monitor.
SEARCH
.
If you are in the middle of your
recording for that day, press
REW/REVIEW to search for the place
you started recording that day or
F.FWD to search for the place you
stopped recording.
,_,_ SEARCH will appear while the
start position is being searched for;
SEARCHI_.I_ while the end
position is being searched for.
When the camcorder locates the
beginning or end of the recording, it
will enter the stop mode. SEARCH
disappears from the viewfinder or
LCD monitor.
Notes: The cassette must remain in the
camcorder for this feature to function. If you
insert a cassette and start recording, this
location will be the starting position for
that day.
This feature will only operate on cassettes
recorded on this camcorder.
To Stop Date Search
Press STOP to stop a search in progress.
25