CRF81A RF Output Adapter
This adapter is used to connect your
camcorder to a standard TV (one without
audio/video input jacks) for playback. If
your antenna cable is the flat twin-lead
type attached by two screws, you will also
need a 300-75 ohm transformer, such as
193983. If your TV has 300-ohm VHF
screw terminals, you will need an optional
75-300 ohm transformer, such as VH54.
193983 Cable Transformer
The 193983 is used to connect a standard
300-ohm antenna twin-lead to a standard
round 75-ohm connector on the RF
output adapter, a VCR, or TV.
AH25 Y-Adapter
This Y-adapter allows you to connect
your camcorder's mono audio cable to a
stereo TV or VCR.
VH54 Cable Transformer
The VH54 is used to connect a standard
round 75-ohm antenna cable to the
300-ohm screw terminals on a TV.
61
To Next Page
Loading...
