PELLET STOVES Chapter 4
red
INSTALLATION AND USE MANUAL
page 47
Operation Technical service - Rights reserved - Reproduction prohibited
means "ACTIVE" and OFF means "INACTIVE". In step
UT 07
, the key
scrolls the number that refers to the days, and the key activates
them or deactivates them. Scroll through the days using the key
.
Then use the key
to establish which days are to be active or
inactive. After making this setting, memorize it with the key
, and
you will automatically go to
UT 08
.
1 Corresponds to MONDAY
2 Corresponds to TUESDAY
3 Corresponds to WEDNESDAY
4 Corresponds to THURSDAY
5 Corresponds to FRIDAY
6 Corresponds to SATURDAY
7 Corresponds to SUNDAY
Example Set the times for lighting (7:30) and extinguishing (9:30) for
programme 1. This is step
UT 07
. Suppose you want to programme the
stove so that it follows this programme on Monday, Wednesday and
Friday.
Press the key
, until you come to either position ON 1, or OFF 1.
If you see ON 1, do nothing. If you see OFF 1, press the key
to
read ON 1 (Monday active).
Now press once on the key
to go to position ON 2, or OFF 2
and again press or not the key
to read OFF 2 (Tuesday not
active).
Press once on the key
to go to ON 3, or OFF 3 and then press
or not key
to read ON 3 (Wednesday active).
Press once on the key
to go to ON 4, or OFF 4 and then press
or not key
to read ON 4 (Thursday inactive).
Press once on the key
to go to ON 5, or OFF 5 and then press
or not key
to read ON 5 (Friday active).
Press once on the key
to go to ON 6, or OFF 6 and then press
or not key
to read ON 6 (Saturday inactive).
Press once on the key
to go to ON 7, or OFF 7 and then press
or not key
to read ON 4 (Sunday inactive).
Finally, press the key
to memorize complete setting of
activations of programme 1, and you will go automatically to step
UT 08,
thus entering PROGRAMME 2.
To Next Page
Loading...
