Reer Mosaic Series - Input;output status; Input;output diagnostics; Fieldbus input (MBU only)

Mosaic fieldbus modules
8540801 • 01/02/2017 • Rev.15 21
 As soon as the bus module receives the data, the configurator enters the
condition.
 The input and output status and relative diagnostics (displayed cyclically if one or more
incorrect events occur) are illustrated in Figure 13 and Figure 14.
 The Fieldbus input whose logical status can be changed freely by the programmer (with the
MBU module only) or via the fieldbus are illustrated in Figure 15.
Input/output status
Figure 13
Input/output diagnostics
Figure 14
Fieldbus input (MBU only)
Figure 15