2.30
ENG_UD64186_5
Réglages de navigation (XNX - Renault)
Allow time-restricted roads
This option enables the use of time-re-
stricted roads and you can set it to
“Alwaysˮ, “Whenop.ˮ or “Neverˮ.
“Allow toll roads”
Enable/disable the use of toll roads on
the route by pressing “ON” or “OFF”.
“Avoidance areas”
Activate/Deactivate the area to be
avoided on the route by pressing “ON”
or “OFF”.
Allow unpaved road
Allow/block the use of roads unsuitable
for vehicles on the route by pressing
ON or OFF.
Pop-up menu
From the pop-up menu 2, you can
change the “Navigation settings”.
You can access the settings below:
– Activate navigation learning by press-
ing “ON” or “OFF”;
– “Automatic guidance proposal” by
pressing “ON” or “OFF”;
– Delete stored routes.
“Downloadable destinations”
From your telephone, you can plan a
journey and share it with the multimedia
system. For further information about
the dedicated app, refer to the section
on MY Renault.
When starting your vehicle, the mul-
timedia systems informs you of “You
have planned a route on your smart-
phone”.
You will have the choice between:
– “Go”;
– “Save to favourites”;
– “Ignore”.
Allow/block destination sharing by
pressing ON or OFF.
NAVIGATION SETTINGS (2/8)
“Allow motorways”
Enable/disable the use of motorways
on the route by pressing “ONˮ or “OFFˮ.
“Allow ferries”
Enable/disable the use of ferries on the
route by pressing “ON” or “OFF”.
“Allow car train”
Enable/disable the use of motorail
trains on the route by pressing “ON” or
“OFF”.
“Navigation learning”
Use this navigation programming func-
tion to manage the confidentiality pa-
rameters related to your navigation
data programming.
The multimedia system analyses your
daily journeys and journey times in
order to suggest a destination without
you having to configure it when the mul-
timedia system starts. E.g. home, work
etc.