Renishaw Equator - Equator 500 Safety Details

32
Equator 500 safety information
6
5
3
17
2
1
8
9
10
11
12
13
14
4
7
15
16
1. Base casting
2. SP25 probe assembly
3. Floating or moving platform
4. Support strut
5. Top casting
6. Drive strut
7. Counterbalance mechanism
8. Upper pivot and alignment bracket
9. Support arm for parallel constraint mechanism
The image below describes the different parts of the Equator 500 gauging system, which are referenced in the
following safety information sections.
10. CE marking and serial number
11. Drive housing
12. Parallel constraint mechanism
13. Fixture plate
14. Workpiece and fixture
15. Stop button and Button Interface, when fitted
16. Blanking cap / eye bolt
17. Equator Autojoint Adapter (EQ-AA1)