• It is prohibited for the user to enter the working volume during automatic operations. The operator is
instructed not to have their hand, or any other part of their body, in the machine during operation.
• During homing, the machine is in automatic mode and will only halt if the physical stop button (15) is
engaged.
• To avoid unexpected movements of the Equator, always recalibrate all probing tools after importing a new
environment into Equator Server.
• When connecting an Equator Autojoint Adapter (17) to the Equator, it must be disconnected from the mains
power supply. Not doing so can cause damage to the circuitry.
• On systems already fitted with the SP25 probe (2), the SP25 body contains high power LEDs which emit
invisible infrared radiation. The user cannot be exposed to this radiation unless the probe is mechanically
damaged. Please refer to the SP25 Installation and Integration Guide, H-1000-7541.
• If this equipment is not used in its intended manner, any protection provided may be impaired and the
warranty may be voided.
• CE mark and serial number (10) are located underneath the front support arm for the constraint
mechanism (9).
34
To Next Page
Loading...
