The Equator gauging system comprises the Equator gauging machine, the Equator Controller and the probing
system.
The Equator gauging system can be an Operator only system or a Programmable system.
The Operator Equator system includes the following components:
• Equator gauging machine
• Controller
• Monitor
• Keyboard
• Mouse
• Probe system
• EQR-6 stylus autochange rack
• Calibration artefact and styli
• Stop button
• One or more fixture plates (as quantity ordered)
• Organiser software
The programmable Equator system includes all of the above as well as the following components:
• Joystick
• MODUS Equator software
• USB dongle (enables MODUS Equator software)
6
To Next Page
Loading...
