ResMed Astral Series User Manual

Accessories
English 43
Connecting to mains power
WARNING
Ensure that the power cord does not pose a tripping or choking hazard.
To connect to mains power:
1. Connect the DC plug of the supplied ResMed external power supply unit to the rear of the Astral
device.
2. Before connecting the power cord to the ResMed power supply unit, ensure the end of the
connector of the power cord is correctly aligned with the input socket on the power supply unit.
3. Plug the other end of the power cord into the power outlet.
Note: The power cord is equipped with a push-pull locking connector. To remove, grasp the power cord housing and
gently pull the connector from the device. Do not twist its outer housing or pull on the cord.

ResMed Astral Series Specifications

General

Type	Ventilator
Display	color LCD
Connectivity	USB
EPAP	0 to 25 cm H2O
Rise Time	Adjustable
PEEP	0 to 25 cm H2O
FiO2 Monitoring	Yes, with optional oxygen module
Battery Backup	Internal and external battery options
Oxygen Capability	Yes, with optional oxygen module
Alarms	Low battery
Pressure Support	0 to 30 cm H2O