Retsch PM100 - Balancing the Device - Only for the PM100 and PM100 CM

Operating the Device
33
5.9 Balancing the device – only for the PM100 and PM100CM
Fig. 18: Balancing the device
The PM 100 must be balanced after inserting and clamping the grinding jar to ensure the device
runs smoothly.
• Weigh the grinding jar with lid, ball filling and sample material.
• Slide the counterbalance weight (E) using the rotary control (F) until the edge (KA) of the
scale (FS) shows the previously determined weight.
KA
E
F
FS