REYMSA COOLING TOWERS, INC.
www.reymsa.com
The
All-Fiberglass
Cooling Towers
41
A.10 OPTIONAL EQUIPMENT
A.10.1 SAFETY OPTIONAL EQUIPMENT
REYMSA offers a variety of optional accessories to help ensure the safety of the personnel operating the
Cooling Tower, like ladder, catwalk, handrail, and davit support, hoist, and trolley (See Figure A-102).
These accessories are designed for easy assembly with labeling on the point of contact and the part being
installed.
Following is a general procedure for installation; each Tower will be provided with specific instructions for
that particular Tower. Assembly Instructions and drawings are issued with every Cooling Tower.
General installation instruction:
1. The accessories are composed of several parts.
2. Each part or section has a corresponding number (on a sticker) on its inner side, for identification.
3. Every section should be jointed with stainless steel screws/bolts and washers (supplied by REYMSA).
4. Do not mix the different sections to avoid assembly problems.
Figure A-102: Optional equipment by REYMSA
RT-D
Installation
To Next Page
Loading...
