5. System Setup and Operations
Interface and Input Signal Option
CP 3072 User Manual 46
26. HDMI preview output, used to connect to the display device, video
processor or matrix.
28. VGA preview output, connect to monitor or projector which with VGA
interface.
30. HDMI PVW output, used to connect to the display device, video
processor or matrix.
1. 5. 9. 13. USB input, can access the USB device or mobile hard disk with
USB storage function. Support general image and video formats. (CP 3072
V1.1 can only support video formats)
2. 6. 10. 14. CVBS output, receive standard video signal from players,
cameras etc. Input supported resolution 480i and 576i via BNC. Supported
standards include: PAL and NTSC.
3. 7. 11. 15. HDMI Input, input the video signal from HD player, DVD,
computer, set top box and hard disk, etc. (Only for CP 3072)
3. 7. 11. 15. 3G-SDI Input, input video signal from HD camera and radio
processing equipment, connect SDI interface via 75 ohms impedance BNC
port. (Only for CP 3072S)
4. 8. 12. 16. VGA (DB15 Port), can support HD player, computer, video
signal. Through the DB15 interface input signal.
18. Power：AC 85-264V, 50/60Hz, IEC-3 power interface.
To Next Page
Loading...
Need help?
General