RGBlink CP 3072 User Manual

5. System Setup and Operation
How to Use Black Out
CP 3072 User Manual 55
How to Use Black Out
Black out descriptions:
Black signal realizes one-key-touch to a black screen.
CP 3072 provides black effect processing for program output and preview output,
with cut black effect. Operation is as below:
Push the [BLACK] button in A-BUS/PGM bar, the button light is on, then the
program output is cut to black.
Push the [BLACK] button in B-BUS/PST bar, the button light is on, then the
preview output is cut to black.
The effect is shown as below:

RGBlink CP 3072 Specifications

General

Brand	RGBlink
Model	CP 3072
Category	Control Panel
Language	English