5. System Setup and Operation
How to Realize the BLEND Setting
CP 3072 User Manual 56
How to Realize the BLEND Setting
1. First, set PIP mode, or user can not set blend.
2. Push the [BLEND] button in BLEND Operation Area, the OLED panel
shows as follows:
3. Turn the knob, and choose <BLENDING>, push the knob to confirm.
Turn the knob, choose “ON”, push the knob to confirm.
4. Turn the knob, and choose <BLEND WIDTH>, push the knob to
confirm. Turn the knob to set the blend width.
5. If image quality distorts by improper operation, it can be recover by
reset.
>BLENDING ON
BLEND WIDTH 10
RESET
To Next Page
Loading...
Need help?
General