5. System Setup and Operations
How to Change the Transition Effects
CP 3072 User Manual 47
How to Change the Transition Effects
1. Push the Effect Modes button in Effects Operation Area, there are 15
kinds of effect modes:
Push the wipe pattern shortcut button , there are 5 kinds of mode:
←□→, →□←, ←＋→, →＋← and ←0→.
Push the wipe pattern shortcut button , there are 5 kinds of mode:
L→R, L←R, T→B, B→T and III→.
Push the wipe pattern shortcut button , there are 3 kinds of mode:
LT→RB, L←M→R and T←M→B.
Push the wipe pattern shortcut button , user can choose cut mode.
Push the wipe pattern shortcut button , user can choose fade in
fade out mode.
2. Push the [TAKE] button, or use T-bar switcher to switch between the
image with effects.
Note: T-bar is only available for fade.
To Next Page
Loading...
Need help?
General