RGBlink CP 3072 User Manual

5. System Setup and Operation
How to Edit the Channel Signal
CP 3072 User Manual 49
How to Edit the Channel Signal
1. Push any button of 1~4 in B-BUS/PST bar in Input Sources Edit Area,
the button light flashes, which means the button can be edited. For
example, push button 2:
2. Push any signal button in Input Sources Edit Area, For example, push
[VGA] button, then the signal of channel 2 will be switched to VGA.
B-BUS INPUT : INPUT 2
INPUT SOURCE: HDMI
RESOLUTION : NO INPUT
B-BUS INPUT : INPUT 2
INPUT SOURCE: VGA
RESOLUTION : NO INPUT

RGBlink CP 3072 Specifications

General

Brand	RGBlink
Model	CP 3072
Category	Control Panel
Language	English