RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
10
Negative movement of Y axis, solw down processing speed, figure
6 inputting different property selecting in Menu
Negative movement of Z axis, figure 7 inputting, reduce spindle
speed during processing
Set Z axis work origin, figure 8 inputting
Machine back home, figure 9 inputting,check information during
processing
High or low speed selection under manual mode, figure 0
inputting,change work coordinate & mechanical coordinate during
processing
Spindle start/stop, decimal point inputting
Enter menu setting, negative sign inputting ,check information
during processing
Back to work origin,confirm motions /inputting/operating
Manual mode, continue/step/distance to select
Run or pause processing,delete inputting data, different property
selecting in menu
High/low speed parameter adjust under manual mode, quit process
stop/selections, inputting and operating cancel
To Next Page
Loading...
