RichAuto A11 - 4.2.2 Auto Pro Setup

RichAuto S & T Co., Ltd
Add: 5th floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
30
4.2.2 Auto Pro Setup
Users can set processing parameters,G code attributes etc.under this menu.
Auto Pro Setup chart
1. Work Speed：Unit：mm/minute
Including work speed and fast speed,system default is 3000 mm/minute.
2. Safe Height：Unit：mm
The height of Z axid rise during processing. system default is 40.000 mm.
3. Auto Scale：
Actual processing speed=work speed*auto scale，system default auto scale does
not affect the fast speed.
4. Fall Scale：
Fall scale， system default is 0.200.fall speed=fast speed*fall scale， the
AUTO PRO SETUP
Work Speed
Safe Height
Auto Scale
Fall Scale
Stop Statue
G Code Setup
Pro Attribute
Work Array