RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
41
5.3.1 Manual operation speed switching and adjusting
1) Speed modes switching
There are two speed modes: high speed and low speed. We can change mode by
press “ ”. The speed mode you choose will decide the processing speed.
2) Speed adjusting:
In manual mode, press “ ” to set the current speed mode. If the current
speed is low speed, it displays as follow:
Press “ ”、“ ”to move the cursor,then press “ ”button to
modify the value, press “ ” to save, press “ ” to quit. If input a wrong
number, press “ ” to delete the last number.
In order to ensure the accuracy of processing and debugging, the system
introduces the concept of grid which also called minimum feed. It range is
0.05mm-1.0mm.When user change mode to “step”, machine will move by grid
distance.
High speed mode setting is the same as low speed mode.
5.3.2 Manual processing mode
In order to meet different situation of manual movement, the system provide 3
kind of motion modes: Continue, step, distance. We can change mode by pressing
Manual Param
XSLOW 1200.000
YSLOW 1200.000
ZSLOW 1200.000
Slow Grid 0.100
To Next Page
Loading...
