RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
45
space according to the instruction, it also called file processing. Before auto
processing, user must set the machine tool parameters and all of the system
parameters correctly.
Auto processing steps:
5.4.1 Determine the origin of the workpiece
The origin coordinates of X, Y and Z in the processing program is the origin of
the workpiece . Before operation, we should pay attention to this position as well as
the real position. Operation is as follow:
Move X, Y and Z to the position which will start to process the file on
workpiece. Afterwards, press zero clearing “ ” can set the origin of X,Y axis.
Press zero clearing “ ” to set the origin of Z axis. It should be noted that if user
have already used the tool setting function which combination button is
“ ”+“ ”, will no need to press the “ ” button.
5.4.2 Choose processing files
After determined the workpiece origin, press“ ” will appears a dialog
frame:
SelectWorkFile
选择 U 盘文件
Internal File
Recent File
UDisk File
U 盘文件件 WENJIAN
To Next Page
Loading...
