RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
33
8. Work Array：
Set array parameter,including columncount 、 Rowcount 、 Columnspace 、
Rowspace、Interval（unit：ms）
Columnspace：File spacing of X direction
Rowspace：File spacing of Y direction
Total Processing times= columncount* Rowcount
Interval：System default 0，it means no wait.
During processing ， if users need to change processing materials after
completion of each processing，you need set time interval a negative number.When
the first time processing is completed, the screen prompt: waiting for the next array
processing, press any key to start the next array processing at this time, if not press，
system keep waiting.
4.2.3 System Setup
System Setup Chart
To Next Page
Loading...
