RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
40
Emergency Version eg：A1.1920
Soft type：3-axis carving
Hardware type：Support 3-inch screen Flash Disk Mode
5. Machine Operation
5.1Return home
It will display “all axis home”, “Z home only”, “none axis home” after
starting up the DSP handle. Choose any one you want. Machine return home can
correct the coordinate of system.
In some cases, such as after normal power off, reboot ad continue last operation,
user no need to reset machine, just choose “none axis home”. That is because system
auto save coordinate value when system quit.
5.2 Import processing files
Before processing, generally we should import files. RichAuto system has 2 ways
for processing: U disk file processing, inner file processing.
1. Directly import the processing file into U disk, then run the handle.
2. Copy the process file to inner memory space via U disk.
5.3 Manual processing Operation
Manual Processing Operation refers to controlling of the machine tool though
keyboard. User can change the operate speed and set the grid under manual
processing operation. System will enter Manual Operation state after returned home,
and the screen displays:
Manual control state initial interface：
1X 0.000 MAUN
1Y 0.000 F 2
1Z 0.000 L SP
Continue
To Next Page
Loading...
