RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
1
Foreword
System Introduction：
RichAuto is CNC motion control system independently developed by Beijing
ruizhi tianhong and it can be widely applied to machinery, advertisement,
woodworking, mold engraving machine, laser, flame, plasma cutting machine, and so
on in the machine control field.
RichAuto make DSP as the core control system， High-speed processing
operation is the microcontroller, PLC systems can’t match；Use embedded structure，
High degree of integration，Strong stability，easy to installation and operation；U disk
support，Removable storage card reader，With USB Interface，High speed transfer，
Plug and play the full realization of all work offline.
Characteristics:
1. System deploy standard X, Y, Z axis motion control method ,Support the rotation
axis（C axis）control，Enables to switch the processing of surface and processing
of rotation ; up extended to X, Y, Z, C four-axis motion control, Implementation
four axis interlocking Control.
2. Multi I / O Point Control，there is eight input and output signals in every basic I /
O signal node，Expansion I / O nodes can be expanded to 32 input and output
signals。
3. Support the standard G code, PLT format instructions; support domestic and
international mainstream CAM software, such as: Type3, Art cam, UG, Pro / E,
Master CAM, Cimatron, Wentai etc.
4. Provide with power-down protection. Instantaneous power processing system to
automatically save the current processing of information (file name, current line
number processing, processing speed, spindle threshold), when power again
machine moves back, the system automatically prompts the user to restore the
processing before power down, the processing operations become more humanity.
5. Support breakpoint memory, file selection, processing. Save 8 different
To Next Page
Loading...
