RichAuto A11 - 14. Auto Upgrade:

RichAuto S & T Co., Ltd
Add: 5th floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
37
When password expires，the screen will display：
Connect engraving machine manufacturers to get password,press“ ”, the
screen will display：
Enter the password,press“ ”to save. The screen will display：
Restart the handle，and system will work normally.
NOTE：If engraving machine manufacturers forgot all password, you can contact our
company and tell us 20-digit original password under “SYSTEM SETUP-Probation
pas”， we will provide the new 20-digit password, entered the new number，and press
“ ”to confirm.
After Cracking Password, restart the handle，and then you can work normally.
14. Auto Upgrade：
If the system has new function，our company will provide upgrade file
（extension ******. PKG & shown as rz-xxxx), users can upgrade through the U
disk, specific steps in Appendix 1. It will not damage the original parameters.
File fomat： .
The system is out of testing
time,please contact the
factory to get more testing
time or unlock!
The time password is
updated successfully,please
restart the control system.
Please input trail 1 password: