Messages Description
Error: Wireless Card Wireless card is not inserted during start up, or the
IEEE 802.11 interface unit or the wireless card is
taken out after start up.
Full: Log Data Capacity The log data capacity is full.
Full: Waste Toner The waste toner is full.
Hex Dump Mode It is a hex dump mode.
Immed. Trans. not connected It did not connect directly with the other party of the
transmission.
Immediate Transmission Failed An error has occurred while transmitting directly.
In Use: Copier The copier is being used.
In Use: Fax The fax is being used.
In Use: Input Tray The input tray is being used by other functions.
Independent-supplier Toner Toner that is not recommended is set.
Jobs Suspended All jobs are suspended.
Key Card not inserted The machine is waiting for key card to be inserted.
Key Card/Counter not inserted The machine is waiting for key card or key counter
to be inserted.
Key Counter not inserted The machine is waiting for key counter to be left in
it.
Malfunction: Bypass Tray There is a problem with the bypass tray.
Malfunction: Ext. Charge Unit There is a problem with the external charge unit.
Malfunction: Output Tray There is a problem with the output tray.
Malfunction: Tray 1 There is a problem with tray 1.
Malfunction: Tray 2 There is a problem with tray 2.
Malfunction: Tray 3 There is a problem with tray 3.
Memory Low: Copy Memory shortage has occurred while the copy was
operating.
4. Monitoring and Configuring the Printer
198
To Next Page
Loading...
Need help?
General
