Message Problem and solutions
SMTPC: no smtp server. connection close. Connection to the SMTP server failed due to no
response from SMTP. This could be because a
server other than the SMTP server has been
specified, or the specified SMTP server port number
is incorrect. Check the SMTP server name, port
number, or the SMTP server port number.
SMTPC: failed to connect smtp server. Connection to the SMTP server failed. This could be
because no connection to the network has been
established, or the network configuration is
incorrect, so there is no response from the SMTP
server, or the specified SMTP server name is
incorrect, or the specified SMTP server IP address
could not be found in the DNS server, or a server
other than the SMTP server has been specified, or
the specified SMTP server port number is incorrect.
Check the DNS Server's IP address and SMTP
server's IP address, or the SMTP server name and
SMTP port number, or the SMTP server's SMTP port
number, or the network connection and
configuration.
SMTPC: username or password wasn't correct.
[response code] (information)
Connection to the SMTP server failed, because the
specified SMTP user name is incorrect, or the
specified SMTP password is incorrect. Check the
SMTP user name and password.
Snmp over IPv4 is ready Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready. Communication over IPv6 with snmp is available.
Snmp over IPX is ready. Communication over IPX with snmp is available.
snmpd start. The snmpd service has started.
The print server received error <error number>
during attempt to log in to the network. Access to
the network was denied. Verify that the print server
name and password are correct.
Login to the file server failed when the print server
was online. The print server is not registered or a
password is specified. Register the print server
without specifying a password.
trap account is unavailable. v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
4. Monitoring and Configuring the Printer
222
To Next Page
Loading...
