15. Press the [Escape] key.
16. Press [End].
17. Press the [OK] key.
18. Press the [User Tools/Counter] key.
• To change the name, see "Registering Names".
• p.230 "Registering Names"
Changing the protocol
This section describes how to change the protocol.
1. Select [FTP] or [NCP] using [ ] or [ ], and then press the [OK] key.
A confirmation message appears.
2. Press [Yes].
3. Enter each item again.
5. Registering Addresses and Users for Facsimile/Scanner Functions
292
To Next Page
Loading...
