7. Press the [OK] key.
8. Press [Details].
9. Select [Folder Info] using [ ] or [ ], and then press the [OK] key.
10. Select [NCP] using [ ] or [ ], and then press the [OK] key.
11. Select the connection type using [ ] or [ ], and then press the [OK] key.
If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a
NetWare server, press [Bindery].
12. Select [Manual Entry] or [Browse Network] to specify the path entry method using [ ] or
[ ], and then press the [OK] key.
5. Registering Addresses and Users for Facsimile/Scanner Functions
314