Electrical Components
D370 4 SM
When reinstalling this switch
1. Adjust the projection [A] of the left side fence bar (it must be centered).
2. Install the by-pass paper size detection switch so that the hole [B] in this switch faces
the projection [A] of the left side fence bar.
3. Reassemble the copier.
4. Plug in and turn on the main power switch.
5. Check this switch operation with SP5803-030 (By-pass paper size < Input Check).
Display on the LCD
Paper Size Display Paper Size Display
A3 SEF 10010000 B5 SEF 11100000
B4 SEF 11010000 B6 SEF 00110000
A4 SEF 11000000 A6 SEF 10110000
1.2.2 PAPER END SENSOR (BYPASS)
1. By-pass tray unit ( By-pass Tray Unit)
To Next Page
Loading...
