Electrical Components
SM 51 D372
500-Sheet
Finisher
D372
2.7 ELECTRICAL COMPONENTS
2.7.1 COMPONENT LAYOUT
1. Positioning Roller Motor 14. Stack Depressor Solenoid
2. Transport Motor 15. Feed-Out Belt HP Sensor
3. Rear Fence HP Sensor 16. Paper Height Sensor
4. Stapler Movement Motor 17. Feed-Out Belt Motor
5. Entrance Sensor 18. Output Tray Full Sensor
6. Stapling Tray Paper Sensor 19. Rear Fence Motor
7. Front Fence HP Sensor 20. Positioning Roller HP Sensor
8. Tray Upper Limit Switch 21. Main Board
9. Top Cover Switch 22. Stapler
10. Stapler Door Switch 23. Stapler Motor
11. Stapler HP Sensor 24. Staple Cartridge Set Sensor
12. Tray Lift Motor 25. Stapler Hammer HP Sensor
13. Front Fence Motor 26. Staple End Sensor
To Next Page
Loading...
